Air Shifters

Apparel
Articles
Battery Boxes
Belt Guards
Bodywork
Contact Us

Chain Guards
Contingency
Engine Stands
Gallery
Gauge Plates
Glove Boxes
Grills/Custom Grate
Harley Davidson
Honda
Kawasaki
Kickstands
Laptop Table
Licens Plate Brackets
News
Specials
Tiger Bike Specs
Videos
Yamaha

2

3

1

4

wossner pistons

web

mps

ward

beringer

ape

schnitz

wwb

ward

mcintosh machine

mtc engineering

nitrous express

kosman



All Tiger Racing Parts Are American Made

TPRS-002-LV
RPM Window Switch, 0-5 Volt Input - Schnitz


TPRS-002-LV

The TPRS-002-LV Window Switch provides a +12 volt output that is controlled by RPM and/or a 0 to 5 volt signal such as Throttle Position or Gear Position. This unit can be connected to the Gear Position or Throttle Position sensor and/or RPM input to activate a nitrous system. This can be configured to activate a nitrous kit at 8,000 RPM and when the throttle is great than 90%.  It will also de-activate the nitrous system when you reach a preset RPM (just before the rev-limiter is recommended).  Or, you can choose to activate the system based on gear position. Great for those wanting more consistency or for those who want to wait and have their nitrous kit come on in 2nd or 3rd gear.

The Throttle Position Input has been designed to tolerate a +12 volt input signal. The allows a Typical, Mechanical Nitrous Wide Open Throttle Switch to be used with the RPM Window Switch function. (This is recommended for those who want to set this up for gear position activation)

Voltage chart for TPRS-002-LV

1.0, 1.5, 2.0, 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4.0, 4.25, 4.5, 4.75, 4.9

The TPRS-002-LV has been designed to work with several different types of engines. There are five different RPM Input options for each of the three RPM ranges.

1--One input pulse for every two crankshaft revolutions. (Newer Sportbike)

2--One input pulse for each crankshaft revolution. (typical single and twin cylinder)

3--Two input pulses for each crankshaft revolution. (typical 4-cylinder operation)

4--Three input pulses for each crankshaft revolution. (typical 6-cylinder operation)

5--Four input pulses for each crankshaft revolution. (typical 8-cylinder operation)

The TPRS-002-LV provides three different RPM ranges.

Low Range - 3,000 RPM to 9,250 RPM in 250 RPM increments

Mid Range - 6,000 RPM to 12,500 RPM in 250 RPM increments

High Range - 6,000 RPM to 16,000 RPM in 500 RPM increments

Dimensions 3"x3.5"x1"

*Note - The ZX-14 GPS starts with a high volts and decreases with each gear change.  The TPS-002-LV can not be connected to the GPS as described above.


Click for the Product Manual
(you must have Adobe Acrobat installed)

 

Price: $159.95